Tag Archives: e28

DIY Garagistic Braided Stainless Steel Brake Lines Installation

  DIY Garagistic Braided Stainless Steel Brake Lines Installation 


Welcome to another episode of Salt City Euros. Today, we’re going to installing stainless steel brake lines from Garagistic.

When replacing your brake lines, you obviously need your stainless steel brake lines, need a set of wrenches with specific wrenches to brake lines, so we have an 11, a 14, and then we have a 15 regular wrench. You need your new brake fluid, and then you need a catch can so you can drain your old brake fluid into. Now some of you may be wondering why DOT 3, why DOT 4. The core difference between the two is that DOT 4 has a higher boiling point, so actually most BMWs require DOT 4 fluid, including the e30. You can see that on your brake fluid reservoir. So especially in applications like this particular vehicle that we will be taking to the track a lot, you want to make sure that you have higher boiling brake fluid. If you ever experience brake fade, which means that you boiled your brake fluid, you definitely want to replace it right away, otherwise the regular maintenance cycle of brake fluid is about three years.

Replacing brake lines is a very straightforward task. Be very careful when dealing with dirty or old brake line fittings. Use special brake line wrenches, 11 and 14 millimeters in this case, to avoid rounding off any of the fittings. When removing the lines, brake fluid may spill, so be very careful and catch any excess with shop rags. Wipe up any spills as soon as possible. The fitting at your brake line caliper should also be a 14 millimeter fitting.

So there are many reasons why people do stainless steel brake lines; some claim it gives you a better pedal feel. In our case specifically, our brake lines are in very bad shape, so we wanted to replace them anyways, and we figured why not add some good brake feel at the same time. So, you can see here that this brake line has rubbed, or has been rubbed through, in multiple spots, which can be a little bit sketchy. Then on top of that, it’s actually started to break on the end here, so these are definitely due for a replacement.

Hand tighten your new brake lines into the caliper, and then tighten them according to the torque specs for your specific application. For our e30, it’s 14 to 17 meters. Do the same for your brake line and hard line fitting, again, using your special brake line wrenches.

 

 

The rear lines of an e30 have two soft brake lines that will be replaced. One of these is tucked above the subframe and near the rear trailing arm mounts. This line will drip a lot of brake fluid, so again, be ready to catch as much as possible with shop rags. Same concept applies here. Hand tighten, and then torque to spec. It is extremely important to hand tighten as far as possible, because cross-threading a break line fitting would be disastrous. It would require costly and time consuming repairs to the brake lines, or potentially even require you to replace the entire hard line, so make sure you take your time with this install. Do not over tighten any of these fittings, either.

The last line is located above your hub assembly and is quite short, but all the same concepts apply.

Time to take a step back and admire your newly installed stainless steel brake lines. Our Garagistic lines boast a beautiful red look that works very well with our KONI shocks and Eibach springs.

The final step of the install is to bleed your entire brake system. Make sure you always have enough brake fluid in your reservoir while bleeding, and start with the brake caliper that is the furthest away from your master cylinder. In our case, it’s the rear passenger side, and then the driver rear, and then the front passenger, and lastly, your driver side caliper. Have a friend pump the brake pedal, and then crack open the bleeder nipple on the brake caliper you’re bleeding. Close the nipple to avoid sucking in any air bubbles, and repeat until no more air bubbles come out of the caliper.

If you need further instructions, there are many great videos, but we’re not going to go into great detail on this particular DIY.

All right, guys. That’s all there is to it. It’s not a very difficult job, but if you don’t feel comfortable doing it, please make sure you get a professional to help you or do it for you. Brakes are obviously very important, so make sure you stay safe. Hope you guys enjoy the video. Please Like if you did. Share, subscribe, make sure you do all that good stuff, and check the parts in the description, and hopefully we’ll see you guys next time.

 

Garagistic: E30 rear trailing arm bushings

GARAGISTIC:
E30 rear trailing arm bushings


E30 rear trailing arm bushings; What are they and why do you need them? Today we’re talking all about Garagistic rear trailing arm bushings, specifically for your E30, your Z3, your 2002, your M Coupe, they all take the same rear trailing arm bushing, which would be similar to this one. It basically replaces the OEM part number 33329061945.

Basically what we got here is the flavors that we usually do all of our poly bushings kit in. You’ve got your 80, you got your 95, and you got your Derlin. Derlin being your all out race application. 95 being a little bit of dual purpose, you know a little bit more, emphasizing a little bit more performance than comfort. Then you’ve got your 80, which is basically your auto cross comfort. It’s a great street application. Often after these age these bushings are incredibly worn out and it’s time to replace them. Even when they’re brand new they don’t inherently have this lip on there, so they tend to kind of have a little bit of play anyway just because they’re actually meant to move a little bit to give you a little bit more comfort in your BMW.

BMW-e30-rear-trailing-arm-bushings
                                 Garagistic polyurethane bushings

 

For track enthusiasts that tends to be not what their main priority is, it’s basically the best handling possible. These definitely give that edge. It’s great for track, auto cross, drift. Even your street cars though, they can definitely benefit from the rear trailing arm bushings. Now this will also fit various other BMW’s like the 1602, 2002, E21, E12’s, E30’s, you know 318ti, the Z3 otherwise known as the angry shoe, it can benefit from having these kind of rear trailing arm bushings on there. Garagistic E30 rear trailing arm bushings are made right here in the USA. We also offer a lifetime warranty on all E30 rear trailing arm bushings.

All parts can be found on the Garagistic app (ANDROID OR APPLE) or on our website www.garagistic.com and if you have any questions, please feel free to shoot us an email or give us a call. We’d be happy to help.

Where to get Garagistic rear trailing arm bushings:

BMW SOLID DELRIN REAR TRAILING ARM BUSHINGS:
https://store.garagistic.com/BMW-E30-…

BMW 80A POLYURETHANE REAR TRAILING ARM BUSHINGS:
https://store.garagistic.com/80a-e30-…

BMW 95A POLYURETHANE REAR TRAILING ARM BUSHINGS:
https://store.garagistic.com/95a-e30-…


garagistic-e30-bmw-app

apple-garagistic-app-e30-bmw

Garagistic E30/E36 Brass caliper guide bushings and stainless steel brake lines

E30/E36 BRASS CALIPER GUIDE BUSHING AND STAINLESS STEEL BRAKE LINES


Doing things how they should be done.

Our brass caliper guides are meant to replace the rubber caliper guides in your e30, e36, e46, and other BMW. They only fit ATE calipers, something to take note of. On your e30 it won’t fit your girling type caliper. This is a great upgrade. The rubber that’s usually in there actually causes a lot of these two pieces of the caliper to actually be sloppy and actually give when you’re braking. There’s a lot of movement in there and it’s something that I’m pretty sure BMW made for comfort. For racing applications you basically want the best pedal feel, the least amount of unwanted movement in your calipers assembly. The brass caliper bushings can be a great upgrade. You pair that up with stainless steel brake lines and you got yourself pretty much, almost fully restored braking system. You got to change the fluid and the actual consumables. These two parts play a major role in the performance braking of your e30, e36, and e46.  Garagistic brass caliper guide bushings are made right here in the USA.

Check out the Garagistic app (ANDROID OR APPLE) or our website www.garagistic.com and if you have any questions, please feel free to shoot us an email or give us a call. We’d be happy to help.

Brass-caliper-guide-bushings-e30-e23-e24-e28
Garagistic USA made Brass caliper guide bushings

WHERE TO GET BMW BRASS BRAKE ATE CALIPER GUIDE BUSHING SET – E30, E36, E46, E92:

garagistic-e30-bmw-app

apple-garagistic-app-e30-bmw

Why upgrade your E28, E30, and E36 brake lines to stainless steel?

UPGRADING YOUR E28,E30,E36 STAINLESS STEEL BRAKE LINES


The upgrade that keeps on giving.

QUESTION: “Are stainless steel brake lines worth it?”

ANSWER: Only those who have driven a car with them know how truly worth it they are.


Today were going to talk about brake lines, stainless steel brake lines to be exact. Now we carry stainless steel brake lines for your E30, your E28, your E36. We got your other models coming soon like your E46. Upgrading to stainless steel brake lines is a great upgrade.
Usually your stock rubber lines, even when they’re brand new and in good shape, they expand and that can change pedal feel. Stainless steel brake lines you pretty much replaced them and you’ll never have to replace them again. They’re not like other lines. They don’t crack, they don’t break. They offer good pedal feel, a lot firmer pedal feel. A little bit more confidence inspiring braking. It’s definitely a good item to do, and it’s a safety item.
It’s something you should look as soon as you buy your E30, your E28, your E36. It’s something you should look at inspecting the brakes. Now, most commonly a kit like this … This is a E30 kit. It comes with a different amount of lines here. Then you got your front, you got your two front lines. Then you got your two lines that run above your sub-frame, and then your two lines that run to your rear calipers. This installation shouldn’t take too long you. The longest part of process is probably bleeding the brakes.
Other than that it’s probably a 30-45 minutes job, depending on if you have a lift or if you have jack-stands. It really depends. The hardest brake lines to replace on this would be the ones that are above the sub-frame, just because of physically reaching them. Other than that this is not a hard job. It requires some basic tools, some basic break knowledge. With all of our Garagistic products, there’s a lifetime warranty on our brake lines.

It’s something you should definitely look into. Having a failed brake line or failed breaks in general, especially if you’re auto-crossing or you’re tracking, anything really, even on the street. It could be a very dangerous thing, so be sure to check them out you. You can be found on our Garagistic app (ANDROID OR APPLE) or on our website www.garagistic.com and if you have any questions, please feel free to shoot us an email or give us a call. We’d be happy to help.


WHERE TO GET BMW STAINLESS STEEL BRAKE LINES:


e28-e36-e32-e34-e24-stainless-steel-brake-lines


garagistic-e30-bmw-app

apple-garagistic-app-e30-bmw